Sliding Patio Doors Repair
Patio doors that slide open are a great way to enjoy your outdoor space, however they can be difficult to open and close. This can be due to a variety of issues, such as dirty tracks or misaligned rollers.
Clean the track and making sure that the rollers are lubricated. You can also use the adjustment holes on the bottom of the panel to re-align your rollers.
Dirty or Damaged Track
A sliding door that does not slide as it should can result from an unclean or damaged track. Over time, dirt and grit, as well as rust can accumulate and stop the track from moving smoothly. The solution is a thorough cleaning using a brush and mild detergent. This process should be carried out regularly to ensure a smooth operation and avoid costly repairs in the future.
A leaking door is another common problem that requires immediate attention to avoid the growth of mold, water damage and structural deterioration. The problem is usually caused by worn weather stripping and misaligned doors. This can be corrected by replacing the weather stripping and aligning the doors.
Another issue that can be fixed with a little DIY work is the problem of rollers that veer off their track. This can be a difficult task so you should ask a trusted friend to assist you. Stand inside the house, and lean the panel in front of you to reposition the rollers. After lifting the panel off the bottom track, it's time to place it on sawhorses to prevent it from falling off. Then, loosen each of the roller's screws and remove them using the screwdriver. You can now clean any dirt that has accumulated between the wheel and the tracks. Clean each wheel with denatured alcohol and the rag, then move the wheels and attach them to their tracks.
It is possible to straighten bent track sections with a mallet made of rubber and a piece of wood. However when the bent section is located near the hinges and is likely to cause further damage, you'll better off calling an expert to ensure safety.
Rollers that are not aligned
If your sliding door is having difficulty sliding, it's most likely that the roller wheels are not aligned correctly. The wheels could be dirty, rusted or their bearings worn out. This friction causes the door to snag and grind when opened or closed. It also makes squeaking noises.
This is a straightforward solution. You don't have to remove the door to access the wheels, as they are on a bracket which is adjustable. Utilize a screwdriver to find the holes for adjustment on the frame (usually on either side). Rotate the screws to turn the wheels. By turning the screw clockwise, you raise the wheel, whereas turning it counterclockwise lowers it. Continue to adjust the door until it is open and shuts easily.
It is important to adjust the wheels prior adjusting the latch. To ensure that the lock functions properly the latch hooks need to be aligned with the strike plate. If you don't do this, the latch could shut or open while you're away from the room.
A sliding patio door is an investment. Keeping them in good condition will ensure your family's safety. By addressing common problems like damaged tracks, rollers or handles, you can prevent costly repairs in the future. Contact us to learn more about patio doors. We will assess your sliding patio door repair needs and help you keep it in good shape. Our experts can also assist with any replacement parts you may need.
The door frame is loose or damaged
Sliding patio doors are a great option for any home and offer an attractive and convenient alternative to hinged or swing-open patio door options. Like other hardware that they are, they could face many issues in time. Fortunately, most of these issues are simple to fix using a bit of DIY expertise.
A gap in the frame is a common issue with sliding patio doors. This can be due to a number of reasons, including a rollers or tracks that are not aligned properly or a damaged track door, or a bent door frame. In the majority of cases, the problem is easily solved by taking the doors out and reconnecting the track. It is crucial to be very careful not to harm the frame or track.
In some instances, it might be required for the entire track to be replaced. This can be accomplished quickly and easily with a universal kit, which is available in all major hardware stores. These kits are easy to install and will have your door operating perfectly in no time.
Check your sliding door hardware and frame for signs of wear, such as loose screws or bolts. This is a straightforward and efficient DIY patio maintenance procedure that can be done with a screwdriver. Additionally, it is important to lubricate your rollers and tracks to facilitate smooth operation and prevent premature wear.
For many homeowners, their patio doors are the primary access to their backyard and outdoor living space. As such, they need to to function properly to maintain the comfort of their home and provide security. By taking the time to implement these simple DIY maintenance steps homeowners can extend the life span of their sliding patio doors, and avoid costly repairs or replacements.
Faulty Handle
Patio doors that slide open are an ideal way to enter your backyard and enter your home, but they can be difficult to operate if they are damaged or misaligned. A faulty handle can also cause the door to get stuck or be difficult to open and close. The good part is that repairing loose handles is a relatively simple task that can be accomplished at home.
In many cases the loose grip is the result of screws that have fallen out of the backplate. To remedy the issue, tighten the screws that are on the inside of the handle with the help of a screwdriver. If you find that the handle remains loose, it could be an indication that the threads are worn and will need to be replaced.
A broken latch could be the cause. It is more likely that the latch will break if it's made of metal, rather than plastic. Try making sure the latch is lubricated in case it isn't engaging or turning. If this does not work, you may have to replace the lock.
If Repair My Windows And Doors is damaged or broken, it could be difficult to operate. If this happens, you'll need to replace the handle with one that is in line with the style and design of your sliding patio doors.
If your patio doors are old and dated or new and brand new, Feldco can help you get them back on track. We offer high-quality doors in various sizes and styles that can be fitted to fit your home perfectly. To find out more about our products, contact us now! We provide services to Southern California homeowners, including Ventura County and Orange County.
Faulty Weatherstripping
If you're noticing light coming from windows and doors that are shut, or you feel a draft pushing against the door or window, it's time to replace your weather stripping. These strips create an airtight seal, which stops unwanted water, air and pests from entering your home. It also keeps your conditioned and heated air in, saving you energy costs all year round.
It could have lost its strong seal, bouncy, due to age. It is easy to determine this by taking a dollar note and putting it under the seal between the top of the door frame and below the jamb of the door where the two meet. If the dollar bill slides between the seal and door easily then it's time to replace the weatherstripping.
If you only replace the worn-out part of the weather stripping, this could result in future issues with the seal. It's more efficient to replace the entire stripping to ensure that you are able to rest that your door is sealed again.
For a simple DIY project follow our weather stripping project guide to take off the old weather stripping. Then, you can apply the appropriate material to your sliding patio door and frame to create a durable solid, secure seal. It's a great option to repair your door and reduce your energy bill Don't wait until it's too late. You'll be able to save money and improve the look of your home.